50 Tons Industrial Cold Press Machine Main Features:
- Most electrical components use Schneider, main parts have CE approval, furthermore, the complete machine also approved by CE.
- Our machine’s Steel plate are based on the pressure’s requires, to achieve our commitment pressure, thus insured the quality.
- The upper and lower steel frames made by the gantry milling finishing, as a result to ensure absolute formation.
- Fix with automatic control circuit and pressure cut-off protection, automatic lifting, also automatic oil off.
- Fast and efficient pressing, emergency safety braking, trip limited device.
- We use Hydraulic pressing system instead of Pneumatic pressing system, hence the lifting is fast and stable, pressure is uniform and efficiency is high.
Our Certificates
How a Cold Press Machine Works
A cold press uses a hydraulic ram to apply steady, even pressure that cures PVA glue between a veneer or laminate and its substrate at room temperature. It is simple, low-cost and ideal for flat veneer and laminate bonding.
50 Tons China Industrial Cold Press Machine for Wood and Plywood (MH3248*50T) 50 Tons industrial cold press machine is used to press furniture plate, wooden door, as well as furniture, leveling. On the other hand, it’s also suitable for tracking the bonding and pre-forming of flat wood products.
Frequently Asked Questions
- Q: What is a cold press used for?
- A: It bonds veneer, melamine and decorative paper onto flat panels with PVA glue at room temperature.
- Q: Cold or hot press — which should I choose?
- A: Cold press is simpler and cheaper for flat PVA laminating; hot press cures faster and suits higher volume.
- Q: What pressure and platen size are available?
- A: Tonnages and platen sizes vary; match the platen to your panel format and the tonnage to your lay-up.
- Q: How long does curing take?
- A: PVA cold curing runs from minutes to an hour depending on glue, temperature and lay-up — far longer than a hot press.
- Q: What panels can it laminate?
- A: MDF, plywood and particleboard with veneer, paper or melamine film.
- Q: Is training included?
- A: Yes — setup guidance, operation training and spare-part support are provided.
Browse more Cold Press Machine range, or contact Leabon for a confirmed quotation.
