Features of Fully Automatic High Speed Edge Banding Machine for Processing Aluminum Honeycomb Panels
1.In order to minimize the impact of the hot melt adhesive box on the Side banding material, the Side banding material feeding table adopts a double-layer table design.
2.Additionally, the front and back cutting device features an imported wide linear guide structure, providing high strength and reliable precision.
3.Moreover, the machine is equipped with a two-head high-speed trimming device, featuring 0.35kwX2 power and independent high-frequency control. This trimming device also includes 2 trimming saw discs for maximum efficiency.
4.Lastly, the machine features an up and down buffing device with 0.37kwX2 power and 2 buffing cloth wheels, ensuring a smooth and polished finish.
PARTS PICTURES
Pre-milling device
The corrugated traces, burr edge burst or non-vertical phenomenon caused by the panel sawing machine after processing are re-modified.
PUR Glue supply system
PUR environmental protection glue has high bonding strength and small glue line.
PUR Glue pot
The special glue pot is designed to be user-friendly and efficient. Not only is the sol uniform in consistency, but it is also environmentally safe, making it an excellent choice for a wide range of applications.
EVA Gluing device
Large capacity looping glue container. Prevent the glue from carbonizing and apply the glue more evenly.
Press and paste device with glue removal function
Pressing wheel with cleaning function to scrape off excess glue and dust on the pressing wheel. Fully guarantee the cleanliness of the sideband pressing surface.
Front and rear fast end cutting device with pressure holding device
It has a unique pressure-holding air circuit design, which is simple, economical, practical and stable, and adapts to changes in plate thickness.
Four-head Corner rounding profile trimming device
Four-head corner rounding trimming quality is more stable.
Pneumatic double trimming device
Removing the excess Side banding material of the plate will reduce the burden on the finishing motor, and the effect of thick side banding material is better.
Pneumatic scraping device
The angled scraper can scrape the trimmed plate again to remove the excess trimmed horizontal lines. Reduce the generation of wavy lines.
Anti-pinch-device
As long as the hand touches the anti-pinch device, the conveyor belt will automatically stop, and the conveyor belt needs to be switched again to start it, which is a very practical device.
Buffing device
Provides the practical efficiency of the buffing wheel, and the buffing effect is more ideal.
Cleaning agent device
Spray clean oil-containing water mist before buffing, which can reduce the problem of glue layer and board pollution and improve the quality of edge banding.OUR CERTIFICATES
How an Automatic Edge Banding Machine Works (8 Steps)
- Pre-milling — mills the panel edge flat for a seamless glue joint.
- Gluing — applies EVA hot-melt glue evenly along the panel edge.
- Edge feeding & pressing — feeds PVC/ABS/veneer tape and presses it onto the glued edge.
- End trimming — cuts the front and rear excess tape flush with the panel.
- Rough & fine trimming — trims top and bottom tape overflow to a smooth radius.
- Corner rounding — rounds the two ends of the edge for safety and appearance.
- Scraping — scrapes the trimmed edge to remove residual glue lines.
- Buffing — polishes the edge to a clean, glossy finish.
Fully Automatic High Speed Edge Banding Machine Specially Used for Processing Aluminum Honeycomb Panels Glue Type: EVA
EVA hot-melt glue is the cost-effective standard for most furniture and cabinet production; PUR is available on request for high-humidity or heavy-duty use.
Key Parameters
- Panel thickness: 10-60mm
- Feeding speed: 15m/20m/25m/min(three-speed)
- Working air pressure: 6.5
Price Range
Typical ex-works price for this class of machine: $8,000 – $20,000. Final price depends on configuration, voltage and shipping; contact Leabon for a confirmed quotation.
Frequently Asked Questions
- Q: What is an automatic edge banding machine used for?
- A: It seals the exposed edges of panels (MDF, plywood, particleboard, melamine) with PVC, ABS or veneer tape so the board core is protected from moisture and impact, and the furniture looks clean and finished.
- Q: PUR vs EVA hot-melt glue — which should I choose?
- A: EVA is economical and covers most cabinet and furniture work. EVA hot-melt glue is the cost-effective standard for most furniture and cabinet production; PUR is available on request for high-humidity or heavy-duty use. This model is supplied with EVA as standard.
- Q: What panel and edge-band sizes can it handle?
- A: Typical range: Panel thickness: 10-60mm; Feeding speed: 15m/20m/25m/min(three-speed); Working air pressure: 6.5. See the full specification table on this page for the exact model figures.
- Q: How fast is the production line?
- A: Feeding speed is around 15m/20m/25m/min(three-speed) depending on panel profile and glue type, supporting continuous panel-by-panel output for factories.
- Q: Do you provide installation, training and warranty?
- A: Yes. Leabon provides overseas on-site installation, operator training and a 12-month warranty with spare-parts support, so your line runs reliably from day one.
