Features of Angled Roller Conveyor Table
- The speed is controlled by the inverter, which can match the high-speed edge banding.
- There will be no standstill and stuck phenomenon during the workpiece transportation.
- Imported rollers are used in the whole line, and the roller beats low, which ensures the smooth transmission of small-sized workpieces.
- Use high-pressure-resistant aluminum frame and heavy-duty 288mm aluminum to ensure that the whole machine is stable and not deformed.
- The electrical components use the Shihlin brand, which is easy to operate, stable and has a low failure rate.
Machine display
A brand new way
Angled Conveyor RC8026PY-X
Angled Conveyor RC6013PY-X
A brand new way
Practical Application
OUR CERTIFICATES
How an Automated Panel Production Line Works
An automated line links cutting, drilling, edge banding and stacking into one cell. A CNC nesting machine or panel saw sizes the board, a boring machine drills fittings, an edge bander seals edges, and conveyors or a robot move parts between stations — all sequenced by the line controller for uninterrupted, low-labour output.
Angled Roller Conveyor Table for Edge Banding and Sanding Machine If you’re looking to increase efficiency and reduce costs, this is the angled roller conveyor table good for you. This table is designed to be used with edge banding machines and sanding machines in woodworking machinery lines.
Frequently Asked Questions
- Q: What is included in an automated production line?
- A: Typically a CNC nesting machine or panel saw, a multi-boring machine, an edge banding machine and transfer equipment, integrated by a central controller.
- Q: What are the benefits of automating?
- A: Higher daily output, consistent quality, less manual handling and fewer errors versus standalone machines.
- Q: Can I automate in stages?
- A: Yes — many shops add one station at a time (saw, then CNC, then edge bander) and link them later.
- Q: What panel sizes and output can a line handle?
- A: Lines scale from a few hundred to thousands of panels per shift; tell Leabon your target output and panel size to size the line.
- Q: Do the machines share data and formats?
- A: Leabon lines use common panel sizes and nesting/CAD outputs so stations pass parts without re-measuring.
- Q: Is an automated line hard to run?
- A: It is operated from a central console with training; one or two staff supervise the cell rather than running each machine by hand.
Browse more Equipment for Automated Production Line range, or contact Leabon for a confirmed quotation.
