What is an automatic edge banding machine used for?

It seals the exposed edges of panels (MDF, plywood, particleboard, melamine) with PVC, ABS or veneer tape so the board core is protected from moisture and impact, and the furniture looks clean and finished.

What panel and edge-band sizes can it handle?

Typical range: Panel thickness: 9 – 60 mm; Edge band thickness: 0.4 – 3 mm; Feeding speed: 12 / 16 / 20 m/min. See the full specification table on this page for the exact model figures.

How fast is the production line?

Feeding speed is around 12 / 16 / 20 m/min depending on panel profile and glue type, supporting continuous panel-by-panel output for factories.

Do you provide installation, training and warranty?

Yes. Leabon provides overseas on-site installation, operator training and a 12-month warranty with spare-parts support, so your line runs reliably from day one.

Automatic Edge Banding Machine LZJ-668

New

The LZJ-668 is a full-automatic high-speed edge banding machine built for furniture workshops that want reliable daily output. Rated 25.3 kW on a 9 m body and 3,500 kg of stabilised mass, it runs steady through long production shifts at a 12–20 m/min feeding speed. Pre-milling squares the panel edge, dual gluing stations bond the tape evenly, then end cutting, rough and fine trimming, scraping and polishing finish the edge flush and clean.

Enquiry

Description
Parameter

LZJ-668 edge banding machine handles panels 9–60 mm thick, edge band 0.4–3 mm, from 150 mm long and 40 mm wide, at a 12–20 m/min feeding speed. Pre-milling squares the panel edge, dual gluing stations bond the tape evenly, then end cutting, rough and fine trimming, scraping and polishing finish the edge flush and clean. The EVA glue pot comes standard, with a free-cleaning pot and PUR gluing available as options — so you get clean, durable edges on MDF, particleboard and plywood at volume. More videos:https://www.youtube.com/@Ileabon

process Feature

Pre-milling

With built-in soot blowing device, milling one layer first to make the board smoother and the edge sealing more close

The gluing station applies an even, temperature-controlled glue line and bonds the edge tape to the panel. dual gluing stations means you don’t have to change glue for different color frequently.

Gluing

Pressing

A sequence of press rollers drives the glued edge band tight against the panel, eliminating gaps and air bubbles.

Double-rail end trimming cuts both panel ends square and flush, without chipping the Rail. 45 degree precision linearguide structure.

End Cutting

Rough Trimming

Rough trimming removes the bulk of the excess edge band flush to the panel before fine trimming, reducing load on the finishing cutters.

Daul-motor adaptive tracking follows the panel profile to form a consistent corner radius. Edge quality stays stable even as board sizes change across a batch.

Tracking

Scraping

Double scraping stations removes residual glue and shapes the corner radius with digital hand wheel to adjust scraping thickness, erasing the trimming seam line for a clean edge.

business display

How an Automatic Edge Banding Machine Works (8 Steps)

Pre-milling — mills the panel edge flat for a seamless glue joint.
Gluing — applies EVA hot-melt glue evenly along the panel edge.
Edge feeding & pressing — feeds PVC/ABS/veneer tape and presses it onto the glued edge.
End trimming — cuts the front and rear excess tape flush with the panel.
Rough & fine trimming — trims top and bottom tape overflow to a smooth radius.
Corner rounding — rounds the two ends of the edge for safety and appearance.
Scraping — scrapes the trimmed edge to remove residual glue lines.
Buffing — polishes the edge to a clean, glossy finish.

Automatic Edge Banding Machine LZJ-668 Glue Type: EVA

EVA hot-melt glue is the cost-effective standard for most furniture and cabinet production; PUR is available on request for high-humidity or heavy-duty use.

Key Parameters

Panel thickness: 9 – 60 mm
Edge band thickness: 0.4 – 3 mm
Feeding speed: 12 / 16 / 20 m/min
Working air pressure: 0.6 MPa

Price Range

Typical ex-works price for this class of machine: $8,000 – $20,000. Final price depends on configuration, voltage and shipping; contact Leabon for a confirmed quotation.

Frequently Asked Questions

Q: What is an automatic edge banding machine used for?: A: It seals the exposed edges of panels (MDF, plywood, particleboard, melamine) with PVC, ABS or veneer tape so the board core is protected from moisture and impact, and the furniture looks clean and finished.
Q: PUR vs EVA hot-melt glue — which should I choose?: A: EVA is economical and covers most cabinet and furniture work. EVA hot-melt glue is the cost-effective standard for most furniture and cabinet production; PUR is available on request for high-humidity or heavy-duty use. This model is supplied with EVA as standard.
Q: What panel and edge-band sizes can it handle?: A: Typical range: Panel thickness: 9 – 60 mm; Edge band thickness: 0.4 – 3 mm; Feeding speed: 12 / 16 / 20 m/min. See the full specification table on this page for the exact model figures.
Q: How fast is the production line?: A: Feeding speed is around 12 / 16 / 20 m/min depending on panel profile and glue type, supporting continuous panel-by-panel output for factories.
Q: Do you provide installation, training and warranty?: A: Yes. Leabon provides overseas on-site installation, operator training and a 12-month warranty with spare-parts support, so your line runs reliably from day one.

LZJ-668 — Technical Parameters
Item	Value
Model	LZJ-668
Panel Length	≥ 150 mm
Panel Width	≥ 40 mm
Panel Thickness	9 – 60 mm
Edge Band Thickness	0.4 – 3 mm
Feeding Speed	12 / 16 / 20 m/min
Working Pressure	0.6 MPa
Total Power	25.3 kW
Overall Size	9000 × 1000 × 1800 mm
Weight	3500 kg