CNC LOG Carriages with Bandsaw ZMJ-80-300B for Sawmill Features
- Automatic infeed and outfeed log with Servo motor, the feeder, conveyor and automatic log rotating system are optional.
- PLC programmable controller.it can setting and change sawing and cutting mode automatically.
- Stable property,high efficiency,suitable for sawing batch material.
- Popular in Thailand, Maylasia, Indonisia etc. countries, you can see the actual action of our log sawmill when you come to visit us in our customer’s factory.
Detailed Images
Oil pump
Automatic pump, timing oil supply.
Chain turning device
By chain stacker device.
Servo motor
Servo motor control footage size.
Pneumatic clamping device
Clamping wood device with pneumatic system
PLC servo drive control system
Electric Man-machine interface PLC servo drive control system, operational flexibility, humanize convenient and flexible set parameters.
Precision guide
Taiwan precision guide rail to ensure accuracy operationsOur Certifications
How a Solid Wood Cutting Machine Works
A solid wood cutting machine (typically a straight-line rip saw or multi-rip saw) feeds lumber lengthwise past a circular blade to produce clean, parallel-edged strips and components from rough or squared timber. Infeed rollers and a pressure system hold the wood steady so the cut stays straight and safe even on long boards.
CNC LOG Carriages with Cutting Band Saw ZMJ-80-300B It’s used to cut various size and length log automatically, fixed with band saw, automatic feeder and auto returning conveyor system, various models are for different diameter and length log cutting.
Frequently Asked Questions
- Q: What is a solid wood cutting machine used for?
- A: It rips solid lumber into parallel strips, furniture components and flooring blanks, replacing slow and unsafe hand-fed table-saw ripping.
- Q: What wood can a solid wood cutting machine process?
- A: Softwoods and hardwoods, solid timber and some finger-jointed stock; the max thickness and width depend on the model — confirm against the spec sheet.
- Q: What is the difference between a rip saw and a multi-rip saw?
- A: A rip saw cuts one edge or one strip per pass; a multi-rip saw has several blades and turns a board into multiple strips in a single pass for higher yield.
- Q: How accurate are the cuts?
- A: Driven in feed plus fixed fences keep strips parallel to within a fraction of a millimetre, ready for planing or moulding.
- Q: Is a solid wood cutting machine safe to operate?
- A: Yes — powered in feed, blade guards and emergency stops remove the operator from the blade; keep guards fitted and use push devices for shorts.
- Q: What is the typical cutting speed?
- A: Variable-speed in feed runs a few to tens of metres per minute depending on timber and blade count; multi-rip lines are faster for volume work.
Browse more Solid Wood Cutting Machine range, or contact Leabon for a confirmed quotation.
