Automatic MDF, Melamine and Plywood Edge Banding Machine Main Features
1. Our MDF panel edge banding machine uses Taiwan Delta/Invt. frequency controller, insured the duration and precision of our machine.
2. PLC use LG brand, air cylinder use SCM from Japan, INNA liner track, Honeywell limitation switch, all key parts we choose market tested best brands to try to guarantee our edge bander performance and let our customers can enjoy to use our machines.
3. Independent electric lifting up and down system, simple and convenient.
4. Precise encoder control, high speed.
5. Special polishing structure, motor angle can be universal adjusted, make the PVC/Acrylic/ABS/Veneer band polishing and buffing to the best.
6. With such powerful functions and high efficiency, our plywood edge banding machine price is very competitive. As professional edge bander equipment manufacturer and supplier from China, We give factory price direct to final customer, you buy, you save! 
Plywood Edge Bander Machine T-450G
Our shared future
China Edge Banding Machine Factory
Woodworking machine customer site display
Automatic belt changing and edge banding machine
functions introduction
Equipped with double diamond blades, remove the possible waving texture on edge to achieve better edge banding affection.
PRE-MILLING AND END TRIM End trim running through precise liner track, automatically tracked with mould and fast cut with high frequency high speed motor, guaranteed the plain and complete of cutting side.
The buffing device adopts cotton material polishing wheel to sand the finished edge band more smoothly.
Gluing facilities use special structure to evenly spread the glue on both banding panel and band, ensure a more solid adhesion force. Buffing and Gluing
Fine and rough trim facilities are used to remove the extra material on band, it adopts mould automatically track and high frequency high speed motor, ensure the plain and smooth of work piece top and bottom parts.
Scraping units used to remove the texture which might happened during trim processing, guarantee the band to be smooth and plain. Fine Trim / Rough Trim and Scrapping
CE Certificate
How an Automatic Edge Banding Machine Works (8 Steps)
- Pre-milling — mills the panel edge flat for a seamless glue joint.
- Gluing — applies EVA hot-melt glue evenly along the panel edge.
- Edge feeding & pressing — feeds PVC/ABS/veneer tape and presses it onto the glued edge.
- End trimming — cuts the front and rear excess tape flush with the panel.
- Rough & fine trimming — trims top and bottom tape overflow to a smooth radius.
- Corner rounding — rounds the two ends of the edge for safety and appearance.
- Scraping — scrapes the trimmed edge to remove residual glue lines.
- Buffing — polishes the edge to a clean, glossy finish.
Plywood Edge Bander Machine T-450G Glue Type: EVA
EVA hot-melt glue is the cost-effective standard for most furniture and cabinet production; PUR is available on request for high-humidity or heavy-duty use.
Key Parameters
- Panel thickness: 12-60mm
- Edge band thickness: 0.4-3mm
- Feeding speed: 16-18-20mm/min
- Working air pressure: 0.6Mpa
Price Range
Typical ex-works price for this class of machine: $8,000 – $20,000. Final price depends on configuration, voltage and shipping; contact Leabon for a confirmed quotation.
Frequently Asked Questions
- Q: What is an automatic edge banding machine used for?
- A: It seals the exposed edges of panels (MDF, plywood, particleboard, melamine) with PVC, ABS or veneer tape so the board core is protected from moisture and impact, and the furniture looks clean and finished.
- Q: PUR vs EVA hot-melt glue — which should I choose?
- A: EVA is economical and covers most cabinet and furniture work. EVA hot-melt glue is the cost-effective standard for most furniture and cabinet production; PUR is available on request for high-humidity or heavy-duty use. This model is supplied with EVA as standard.
- Q: What panel and edge-band sizes can it handle?
- A: Typical range: Panel thickness: 12-60mm; Edge band thickness: 0.4-3mm; Feeding speed: 16-18-20mm/min. See the full specification table on this page for the exact model figures.
- Q: How fast is the production line?
- A: Feeding speed is around 16-18-20mm/min depending on panel profile and glue type, supporting continuous panel-by-panel output for factories.
- Q: Do you provide installation, training and warranty?
- A: Yes. Leabon provides overseas on-site installation, operator training and a 12-month warranty with spare-parts support, so your line runs reliably from day one.
