Features of Double End Tenon Milling Machine
- The fuselage and its bed are made of high-quality castings as a whole. After special treatment and precision machining by the pentahedron gantry machining center, it has stable performance, good rigidity and high precision.
- The feeding adopts high-precision synchronous crawler belt, which has stable performance, smooth operation, accurate positioning, stable reliability and low noise
- The main shaft is made of special materials, after special treatment, precision machining and assembly, the spindle speed of the milling cutter can reach 7000 rpm, which has the advantages of stable operation and good processing quality
our certificate
How Planers and Moulders Work
A surface planer flattens one face and squares an edge; a thickness planer makes the board a consistent thickness; a four-side moulder (4-sided planer) joints, thicknesses and profiles all four sides in one pass using stacked cutterheads. They prepare rough sawn timber into smooth, dimensionally accurate stock ready for furniture and flooring.
Double End Tenon Milling Machine This machine is equipped with an automatic feeding hopper mechanism to realize automatic feeding and processing of wood floors, especially suitable for batch milling, tenon and slotting in the solid wood floor processing industry. This product reduces the labor intensity of workers and greatly improves the processing efficiency.
Frequently Asked Questions
- Q: What is the difference between a planer and a moulder?
- A: A planer squares and thicknesses flat stock; a four-side moulder also cuts decorative or functional profiles (bead, tongue-and-groove) on all sides in a single pass.
- Q: What wood can a planer or moulder process?
- A: Softwood and hardwood solid timber; max width and thickness vary by model — confirm the working size on the spec sheet.
- Q: Why use a four-side moulder instead of a separate planer?
- A: It joints, thicknesses and profiles in one setup, holding tolerances tight and raising output for flooring, skirting and mouldings.
- Q: How fine a surface finish do they give?
- A: With sharp blades and correct feed speed they leave a smooth, ready-to-finish surface; spiral/helical cutterheads reduce tear-out on figured wood.
- Q: What is the typical working width?
- A: Bench planers start around 300 mm; industrial moulders run 200–600 mm wide — pick to match your board sizes.
- Q: Do planers handle wet or green timber?
- A: They are built for seasoned timber; very wet or resinous wood dulls blades faster, so dry stock first.
Browse more Planer and Moulder Machine range, or contact Leabon for a confirmed quotation.
