Pre-milling：
Routers the panel edge with 2 pcs 2.2kw motors to remove micro-defects and square it before gluing — guaranteeing maximum glue adhesion and a bubble-free bond. 1
Gluing:
The gluing station applies an even, temperature-controlled glue line and controls the distance between the guide plate and the gluing device at about 0.1mm to ensure the gluing quality.
End cutting :
45 degree precision linear guideway structure end cutting trims both panel ends square and flush with two pcs 0.37kw motors. 1
Fine trimming:
Two pcs motors, each one is 0.75kw high-speed motor. Two pcs fine milling cutters, specification: ( radius R1.5). Equipped with digital hand wheel to adjust trimming thickness and a independent dust hood.
Scraping:
Erasing the trimming seam line with a radius R1.5 scraper blade. Equipped with digital hand wheel to adjust the thickness of scraping edge and a electronic pneumatic control blower.Cleaning:
Spray cleaning agent before buffing to remove the overflowing glue on the surface of the workpiece, reduce the problem of glue lines and plate stains, and improve the quality of edge sealing.How an Automatic Edge Banding Machine Works (8 Steps)
- Pre-milling — mills the panel edge flat for a seamless glue joint.
- Gluing — applies EVA hot-melt glue evenly along the panel edge.
- Edge feeding & pressing — feeds PVC/ABS/veneer tape and presses it onto the glued edge.
- End trimming — cuts the front and rear excess tape flush with the panel.
- Rough & fine trimming — trims top and bottom tape overflow to a smooth radius.
- Corner rounding — rounds the two ends of the edge for safety and appearance.
- Scraping — scrapes the trimmed edge to remove residual glue lines.
- Buffing — polishes the edge to a clean, glossy finish.
Edge Banding Machine 365JS Glue Type: EVA
EVA hot-melt glue is the cost-effective standard for most furniture and cabinet production; PUR is available on request for high-humidity or heavy-duty use.
Key Parameters
- Panel thickness: 9 – 60 mm
- Edge band thickness: 0.4 – 3 mm
- Feeding speed: 12 – 20 m/min
- Working air pressure: 0.6Mpa
Price Range
Typical ex-works price for this class of machine: $8,000 – $20,000. Final price depends on configuration, voltage and shipping; contact Leabon for a confirmed quotation.
Frequently Asked Questions
- Q: What is an automatic edge banding machine used for?
- A: It seals the exposed edges of panels (MDF, plywood, particleboard, melamine) with PVC, ABS or veneer tape so the board core is protected from moisture and impact, and the furniture looks clean and finished.
- Q: PUR vs EVA hot-melt glue — which should I choose?
- A: EVA is economical and covers most cabinet and furniture work. EVA hot-melt glue is the cost-effective standard for most furniture and cabinet production; PUR is available on request for high-humidity or heavy-duty use. This model is supplied with EVA as standard.
- Q: What panel and edge-band sizes can it handle?
- A: Typical range: Panel thickness: 9 – 60 mm; Edge band thickness: 0.4 – 3 mm; Feeding speed: 12 – 20 m/min. See the full specification table on this page for the exact model figures.
- Q: How fast is the production line?
- A: Feeding speed is around 12 – 20 m/min depending on panel profile and glue type, supporting continuous panel-by-panel output for factories.
- Q: Do you provide installation, training and warranty?
- A: Yes. Leabon provides overseas on-site installation, operator training and a 12-month warranty with spare-parts support, so your line runs reliably from day one.
