process Feature
Pre-milling
With built-in soot blowing device, milling one layer first to make the board smoother and the edge sealing more close
Laser edge sealing technology avoids the tedious work of glue feeding, melting and glue tank cleaning, and raises the efficiency of edge sealing.
Gluing
Pressing
A sequence of press rollers drives the glued edge band tight against the panel, eliminating gaps and air bubbles.
Double-rail end trimming cuts both panel ends square and flush, without chipping the Rail. 45 degree precision linearguide structure.
End Cutting
Rough Trimming
Rough trimming removes the bulk of the excess edge band flush to the panel before fine trimming, reducing load on the finishing cutters.
Four-motor adaptive tracking follows the panel profile to form a consistent corner radius. More faster than conventional dual-motor profiling tracking.
Tracking
Scraping
Double scraping removes residual glue and shapes the corner radius with digital hand wheel to adjust scraping thickness, erasing the trimming seam line for a clean edge.
Machine Configuration
How an Automatic Edge Banding Machine Works (8 Steps)
- Pre-milling — mills the panel edge flat for a seamless glue joint.
- Gluing — applies EVA hot-melt glue evenly along the panel edge.
- Edge feeding & pressing — feeds PVC/ABS/veneer tape and presses it onto the glued edge.
- End trimming — cuts the front and rear excess tape flush with the panel.
- Rough & fine trimming — trims top and bottom tape overflow to a smooth radius.
- Corner rounding — rounds the two ends of the edge for safety and appearance.
- Scraping — scrapes the trimmed edge to remove residual glue lines.
- Buffing — polishes the edge to a clean, glossy finish.
Edge banding machine LZJ-698 Glue Type: EVA
EVA hot-melt glue is the cost-effective standard for most furniture and cabinet production; PUR is available on request for high-humidity or heavy-duty use.
Key Parameters
- Panel thickness: 9 – 60 mm Board thickness range
- Edge band thickness: 0.4 – 3 mm Tape / edge band range
- Feeding speed: 12 / 16 / 20 m/min 3-speed selectable
- Working air pressure: 0.6 MPa Pneumatic supply
Price Range
Typical ex-works price for this class of machine: $8,000 – $20,000. Final price depends on configuration, voltage and shipping; contact Leabon for a confirmed quotation.
Frequently Asked Questions
- Q: What is an automatic edge banding machine used for?
- A: It seals the exposed edges of panels (MDF, plywood, particleboard, melamine) with PVC, ABS or veneer tape so the board core is protected from moisture and impact, and the furniture looks clean and finished.
- Q: PUR vs EVA hot-melt glue — which should I choose?
- A: EVA is economical and covers most cabinet and furniture work. EVA hot-melt glue is the cost-effective standard for most furniture and cabinet production; PUR is available on request for high-humidity or heavy-duty use. This model is supplied with EVA as standard.
- Q: What panel and edge-band sizes can it handle?
- A: Typical range: Panel thickness: 9 – 60 mm Board thickness range; Edge band thickness: 0.4 – 3 mm Tape / edge band range; Feeding speed: 12 / 16 / 20 m/min 3-speed selectable. See the full specification table on this page for the exact model figures.
- Q: How fast is the production line?
- A: Feeding speed is around 12 / 16 / 20 m/min 3-speed selectable depending on panel profile and glue type, supporting continuous panel-by-panel output for factories.
- Q: Do you provide installation, training and warranty?
- A: Yes. Leabon provides overseas on-site installation, operator training and a 12-month warranty with spare-parts support, so your line runs reliably from day one.
