Functional Description
Separation device – pre-milling – double glue pot – 6 -wheel scraper edge – end-cutting – rough trimming – fine trimming – four head corner rounding – double scraping edge – flexible flat scraping – double buffing – front and back cleaning –Baking lamp (crawler drive)
Pre-milling function: ◆ With built-in soot blowing device, milling one layer first to make the board smoother and the edge banding more close
Gluing device: ◆ The glue pot is more stable and glue is not easy to overflow.
◆The glue coating and tape feeding device adopts a knurled needle wheel structure, which makes the tape feeding smoother.
◆The distance between the guide plate and the glue coating device is controlled at about 0.1mm to ensure the quality of glue coating.
6-wheel scraper edge: ◆One active pressing wheel and five driven pressing wheels ensure a firm fit between the edge band and the panel.
◆Equipped with digital hand wheel to adjust the thickness of the pressing belt.
◆Each pressing wheel is equipped with a scraper to clean the residual glue on the pressing wheel simultaneously.
End-cutting device: ◆45 degree precision linear guide structure.
◆Two 0.37kw motors, speed: 12000rpm.
◆Adopt frequency converter control
Rough trim device: ◆Two motors, each with a power of 0.75kw high-speed motor.
◆Two roughing milling cutters.
◆Equipped with independent dust cover
Fine trim device: ◆Two motors, each with a power of 0.75kw high-speed motor.
◆Two finishing milling cutters, specifications: (arc radius R1.5).
◆Equipped with digital hand wheel to adjust trimming thickness
◆Equipped with independent dust hood.
Four-head Corner rounding device: ◆4 motors, each high-speed motor with a power of 0.37KW.
◆4 tracking knives with 6 blades can achieve perfect contour tracking effect.
◆Equipped with digital hand wheel to adjust trimming thickness
◆Equipped with independent dust hood.
Scraping device: ◆Scraper blade radius R1.5.
◆Equipped with digital hand wheel to adjust scraping thickness.
◆Equipped with electronic pneumatic control blowing
Detergent device: ◆Spray cleaner before polishing to remove glue overflowing from the surface of the attached workpiece, reduce the problem of glue lines and plate stains, and improve the edge banding quality.
Electrical equipment: ◆Input voltage 3phase 380v, 50hz.
◆Independent inverter control with motor braking function.
◆Phase sequence protection device.
◆All equipment and electrical appliances comply with relevant national standards.
Controls system: ◆Adopt 15-inch brand touch screen.
◆Adopt Taiwan Delta temperature control module
How an Automatic Edge Banding Machine Works (8 Steps)
- Pre-milling — mills the panel edge flat for a seamless glue joint.
- Gluing — applies EVA hot-melt glue evenly along the panel edge.
- Edge feeding & pressing — feeds PVC/ABS/veneer tape and presses it onto the glued edge.
- End trimming — cuts the front and rear excess tape flush with the panel.
- Rough & fine trimming — trims top and bottom tape overflow to a smooth radius.
- Corner rounding — rounds the two ends of the edge for safety and appearance.
- Scraping — scrapes the trimmed edge to remove residual glue lines.
- Buffing — polishes the edge to a clean, glossy finish.
Fully Automatic Edge Banding Machine LZJ1008 Glue Type: EVA
EVA hot-melt glue is the cost-effective standard for most furniture and cabinet production; PUR is available on request for high-humidity or heavy-duty use.
Key Parameters
- Panel thickness: 10-60mm Dust suction diameter ∮100mm*2
- Edge band thickness: 0.4-3mm Total power 27kw
- Feeding speed: 15, 18, 23m/min Equipment weight 7000kg
Price Range
Typical ex-works price for this class of machine: $8,000 – $20,000. Final price depends on configuration, voltage and shipping; contact Leabon for a confirmed quotation.
Frequently Asked Questions
- Q: What is an automatic edge banding machine used for?
- A: It seals the exposed edges of panels (MDF, plywood, particleboard, melamine) with PVC, ABS or veneer tape so the board core is protected from moisture and impact, and the furniture looks clean and finished.
- Q: PUR vs EVA hot-melt glue — which should I choose?
- A: EVA is economical and covers most cabinet and furniture work. EVA hot-melt glue is the cost-effective standard for most furniture and cabinet production; PUR is available on request for high-humidity or heavy-duty use. This model is supplied with EVA as standard.
- Q: What panel and edge-band sizes can it handle?
- A: Typical range: Panel thickness: 10-60mm Dust suction diameter ∮100mm*2; Edge band thickness: 0.4-3mm Total power 27kw; Feeding speed: 15, 18, 23m/min Equipment weight 7000kg. See the full specification table on this page for the exact model figures.
- Q: How fast is the production line?
- A: Feeding speed is around 15, 18, 23m/min Equipment weight 7000kg depending on panel profile and glue type, supporting continuous panel-by-panel output for factories.
- Q: Do you provide installation, training and warranty?
- A: Yes. Leabon provides overseas on-site installation, operator training and a 12-month warranty with spare-parts support, so your line runs reliably from day one.
