- Our woodworking veneer and door Hot Press Machine fix with quality Taiwan Valve, insured the stabilization of the hydraulic system.
- All our wood press machine use Schneider Electrical parts, durable and easy for maintenance.
- Solid drilled holes steel plate installed in our heat press machine, in contrast to the hollow plate used by other heat press manufactures.
Channel Steel Thickened Body
The machine body is welded and formed by thickened steel plates, and the countertop is door milling, the body is treated with anti-corrosion and rust removal, the whole body is spray anti-rust paint, effective anti-rust, both beautiful and practical.Strict Welding Process
Further improving the stability of each joint of the machine body, can effectively ensure the stability of the machine and improve the service life.
Integrated Cylinder
The machine adopts an integrated oil cylinder to ensure that it does not leak oil for a long time, and achieves a good pressure maintaining effect.
Our Certificates
How a Hot Press Machine Works
A hot press applies heat and pressure through heated platens to cure glue or activate film adhesive, bonding veneer, laminate or paper to panels far faster than cold pressing. It is the high-throughput choice for flat lamination.
Hot Press Machine for Plywood 160Tons 3 Layers MH3848x160Tons(3) Woodworking hydraulic veneer heat press machine is suitable for the door factory, as well as panel secondary processing plant. Which can make lamination for furniture panel, building partition, wooden door and consequently laminates all kinds of decorative material onto man-made board, such as MDF and plywood.…
Frequently Asked Questions
- Q: What is a hot press used for?
- A: It bonds veneer, melamine and decorative paper to panels with heat-cured glue for fast, flat lamination.
- Q: Hot or cold press — which should I choose?
- A: Hot press cures faster and suits higher volume; cold press is simpler for lower output.
- Q: What temperature and pressure does it use?
- A: Set by the glue and lay-up; Leabon specifies the range for each model.
- Q: What panel size can it press?
- A: Platen sizes cover door and panel formats; match to your sheet size.
- Q: What is the cycle time?
- A: Heat-cured cycles are typically minutes per lay-up, much faster than cold pressing.
- Q: Is training included?
- A: Yes — setup guidance, operation training and spare-part support are provided.
Browse more Hot Press Machine range, or contact Leabon for a confirmed quotation.
