Leabon edge banding machines adopt self-developed adaptive trimming and scraping units to finish both straight and L-shaped edge profiles with excellent fillet forming precision, followed by cleaning spray and dual-wheel polishing. The full sequence of this edge bander runs in a single 7.8 m pass at 6–13 m/min. Built on a laser-cut, powder-coated C-frame with an electrophoretic aluminium beam (straightness 0.2 mm / 1,000 mm) and branded electronics (WEICHUANG inverter & PLC, Schneider contactors, Omron relays, Autonics sensors), the LZJ-565L edge banding machine is rated 26.4 kW / 380 V / 0.6 MPa — a complete, ready-to-run upgrade from straight banding to profile work. More product videos: https://www.youtube.com/@Ileabon
Pre-milling
Dual 5.5 kW inverter milling motors — one spinning forward, one reverse — mill the profile without chipping the front or rear edge.
Gluing
Four-wheel servo pressing with EVA glue perfectly bonds the edge band to the vertical face of the panel edge. 1
L-shaped bending
A dedicated forming-pressing station (with heating and a floating block that hugs the lower edge) shape the band tightly around the profile.
Fine Trimming
A motors with a 0.75kw high-speed motor. Two finishing milling cutters. Equipped with digital hand wheel to adjust trimming thickness and independent dust cover.
End cutting
45 degree precision linearguide structure. Two 0.37kw motors, speed:12000rpm. Adopt frequency converter control 1
Polishing
Equipped with cleaning spraying and dual-wheel polishing stations, it delivers clean and smooth finished edges. 1
PRODUCT VEDIO
How an Automatic Edge Banding Machine Works (8 Steps)
- Pre-milling — mills the panel edge flat for a seamless glue joint.
- Gluing — applies EVA hot-melt glue evenly along the panel edge.
- Edge feeding & pressing — feeds PVC/ABS/veneer tape and presses it onto the glued edge.
- End trimming — cuts the front and rear excess tape flush with the panel.
- Rough & fine trimming — trims top and bottom tape overflow to a smooth radius.
- Corner rounding — rounds the two ends of the edge for safety and appearance.
- Scraping — scrapes the trimmed edge to remove residual glue lines.
- Buffing — polishes the edge to a clean, glossy finish.
L-shaped Edge Banding Machine LZJ-565L Glue Type: EVA
EVA hot-melt glue is the cost-effective standard for most furniture and cabinet production; PUR is available on request for high-humidity or heavy-duty use.
Key Parameters
- Panel thickness: 10 – 60 mm
- Edge band thickness: 0.6 – 0.8 mm
- Feeding speed: 6 – 13 m/min
- Working air pressure: 0.6 MPa
Price Range
Typical ex-works price for this class of machine: $8,000 – $20,000. Final price depends on configuration, voltage and shipping; contact Leabon for a confirmed quotation.
Frequently Asked Questions
- Q: What is an automatic edge banding machine used for?
- A: It seals the exposed edges of panels (MDF, plywood, particleboard, melamine) with PVC, ABS or veneer tape so the board core is protected from moisture and impact, and the furniture looks clean and finished.
- Q: PUR vs EVA hot-melt glue — which should I choose?
- A: EVA is economical and covers most cabinet and furniture work. EVA hot-melt glue is the cost-effective standard for most furniture and cabinet production; PUR is available on request for high-humidity or heavy-duty use. This model is supplied with EVA as standard.
- Q: What panel and edge-band sizes can it handle?
- A: Typical range: Panel thickness: 10 – 60 mm; Edge band thickness: 0.6 – 0.8 mm; Feeding speed: 6 – 13 m/min. See the full specification table on this page for the exact model figures.
- Q: How fast is the production line?
- A: Feeding speed is around 6 – 13 m/min depending on panel profile and glue type, supporting continuous panel-by-panel output for factories.
- Q: Do you provide installation, training and warranty?
- A: Yes. Leabon provides overseas on-site installation, operator training and a 12-month warranty with spare-parts support, so your line runs reliably from day one.
