Leabon Log Frame Sawing Machine Main Features:
1. Within the range of sawing, multiple saw blades can be installed according to the thickness of the processed board, and multiple boards with different thicknesses can be sawed at one time 2. The tension of the saw blade is good, the sawn timber has high precision and good surface quality 3. Because multiple positioning, clamping, side feed and other operating procedures are avoided, the auxiliary time is shortened, and there is no empty stroke, so the production efficiency is high 4. The frame saw machine has low labor intensity and good safety performance, and does not require high technical level of operators 5. The production process is simple, the floor area is small, and the investment cost is saved
It’s time to discover the best food for you & the planet.
OUR CERTIFICATE
How a Solid Wood Cutting Machine Works
A solid wood cutting machine (typically a straight-line rip saw or multi-rip saw) feeds lumber lengthwise past a circular blade to produce clean, parallel-edged strips and components from rough or squared timber. Infeed rollers and a pressure system hold the wood steady so the cut stays straight and safe even on long boards.
Log Frame Sawing Machine Because the production process is simple, easy to operate, and easy to realize continuous production and automation, it is widely used, especially in Sweden, Finland and Norway in Northern Europe, where the frame saw machine is the main saw machine. Countries such as the former Soviet Union and Eastern Europe, such…
Frequently Asked Questions
- Q: What is a solid wood cutting machine used for?
- A: It rips solid lumber into parallel strips, furniture components and flooring blanks, replacing slow and unsafe hand-fed table-saw ripping.
- Q: What wood can a solid wood cutting machine process?
- A: Softwoods and hardwoods, solid timber and some finger-jointed stock; the max thickness and width depend on the model — confirm against the spec sheet.
- Q: What is the difference between a rip saw and a multi-rip saw?
- A: A rip saw cuts one edge or one strip per pass; a multi-rip saw has several blades and turns a board into multiple strips in a single pass for higher yield.
- Q: How accurate are the cuts?
- A: Driven in feed plus fixed fences keep strips parallel to within a fraction of a millimetre, ready for planing or moulding.
- Q: Is a solid wood cutting machine safe to operate?
- A: Yes — powered in feed, blade guards and emergency stops remove the operator from the blade; keep guards fitted and use push devices for shorts.
- Q: What is the typical cutting speed?
- A: Variable-speed in feed runs a few to tens of metres per minute depending on timber and blade count; multi-rip lines are faster for volume work.
Browse more Solid Wood Cutting Machine range, or contact Leabon for a confirmed quotation.
