LZJ-365B is the base model in the mini edge banding machine series. It meets the basic requirements of automatic edge banding machines and offers the best cost performance. More product videos: https://www.youtube.com/@Ileabon
Process Demonstration
Gluing & Pressing
Distance between the guide plate and the gluing device is controlled at approximately 0.1mm to ensure high-quality gluing. Two-wheels pressing rollers drives the tape tightly onto the glued edge for a bubble-free, durable bond.
End Cutting :
Fine Trimming:
Two fine trimming cutters trim the excess band flush to the panel surfaces for a smooth, even edge. Two high-speed motors, each with a power of 0.75 Kw. Equipped with a digital handwheel to adjust trimming thickness and a separate dust hood.
Scraping:
Cleaning & Polishing:
extra equipment
Electrical Equipment:
Control Device:
How an Automatic Edge Banding Machine Works (8 Steps)
- Pre-milling — mills the panel edge flat for a seamless glue joint.
- Gluing — applies EVA hot-melt glue evenly along the panel edge.
- Edge feeding & pressing — feeds PVC/ABS/veneer tape and presses it onto the glued edge.
- End trimming — cuts the front and rear excess tape flush with the panel.
- Rough & fine trimming — trims top and bottom tape overflow to a smooth radius.
- Corner rounding — rounds the two ends of the edge for safety and appearance.
- Scraping — scrapes the trimmed edge to remove residual glue lines.
- Buffing — polishes the edge to a clean, glossy finish.
Mini Edge Banding Machine 365B Glue Type: EVA
EVA hot-melt glue is the cost-effective standard for most furniture and cabinet production; PUR is available on request for high-humidity or heavy-duty use.
Key Parameters
- Panel thickness: 9 – 60 mm
- Edge band thickness: 0.4 – 3 mm
- Feeding speed: 12 – 20 m/min
- Working air pressure: 0.6Mpa
Price Range
Typical ex-works price for this class of machine: $800 – $3,000. Final price depends on configuration, voltage and shipping; contact Leabon for a confirmed quotation.
Frequently Asked Questions
- Q: What is an automatic edge banding machine used for?
- A: It seals the exposed edges of panels (MDF, plywood, particleboard, melamine) with PVC, ABS or veneer tape so the board core is protected from moisture and impact, and the furniture looks clean and finished.
- Q: PUR vs EVA hot-melt glue — which should I choose?
- A: EVA is economical and covers most cabinet and furniture work. EVA hot-melt glue is the cost-effective standard for most furniture and cabinet production; PUR is available on request for high-humidity or heavy-duty use. This model is supplied with EVA as standard.
- Q: What panel and edge-band sizes can it handle?
- A: Typical range: Panel thickness: 9 – 60 mm; Edge band thickness: 0.4 – 3 mm; Feeding speed: 12 – 20 m/min. See the full specification table on this page for the exact model figures.
- Q: How fast is the production line?
- A: Feeding speed is around 12 – 20 m/min depending on panel profile and glue type, supporting continuous panel-by-panel output for factories.
- Q: Do you provide installation, training and warranty?
- A: Yes. Leabon provides overseas on-site installation, operator training and a 12-month warranty with spare-parts support, so your line runs reliably from day one.
