Features of PUR Fully Automatic Edge Banding Machine
1. Our PUR edge banding machine uses Taiwan Delta PLC, insured the duration and precision of our machine. 2. Both air cylinder and solenoid valve use Taiwan AirTAC brand, all key parts we choose market tested best brands to try to guarantee our edge bander performance and let our customers can enjoy to use our machines. 3. Independent electric lifting up and down system, simple and convenient. 4. Precise encoder control, high speed. 5. With such powerful functions and high efficiency, our PUR edge banding machine price is very competitive. As professional edge bander equipment manufacturer and supplier from China, We give factory price direct to final customer, you buy, you save!
PARTS PICTURES
PUR glue pot
PUR glue pot can be used for EVA and PUR glue, it’s expected to clean the glue pot before using. The glue pot is equipped with a glue discharge port which for degumming. The heating method is external auxiliary heating.
Pre-milling
Solve defects such as burrs and slumps of the sheet to achieve better edge bangding effect.
End cutting
The end cutting mechanism uses precise guide rail movement, adopts automatic tracking and high-frequency motor fast cutting structure to ensure the smooth cutting surface.
Rough trimming/Fine trimming
Rough trimming knife to remove excess edges.The Fine Trimming knife is used to remove the excess edge banding on the upper and lower sides of the board to make the board flat.
Scrapping
It is used to eliminate the ripple marks produced in the trimming process and make the upper and lower parts of the sheet more smooth and tidy.
Buffing
Clean the board with a cotton buffing wheel to smoothen the edge-banding end.OUR CERTIFICATES
How an Automatic Edge Banding Machine Works (8 Steps)
- Pre-milling — mills the panel edge flat for a seamless glue joint.
- Gluing — applies PUR hot-melt glue evenly along the panel edge.
- Edge feeding & pressing — feeds PVC/ABS/veneer tape and presses it onto the glued edge.
- End trimming — cuts the front and rear excess tape flush with the panel.
- Rough & fine trimming — trims top and bottom tape overflow to a smooth radius.
- Corner rounding — rounds the two ends of the edge for safety and appearance.
- Scraping — scrapes the trimmed edge to remove residual glue lines.
- Buffing — polishes the edge to a clean, glossy finish.
China Manufacturers Edge Bander Machine Wood Board MDF Melamine Woodworking PUR Fully Automatic Edge Banding Machine 368JP Glue Type: PUR
PUR hot-melt glue gives a stronger, heat- and moisture-resistant bond — ideal for kitchen, bathroom, outdoor and high-humidity panels.
Key Parameters
- Panel thickness: 9-60mm
- Edge band thickness: 0.4-3mm
- Feeding speed: 12-20m/min
- Working air pressure: 0.6Mpa
Price Range
Typical ex-works price for this class of machine: $15,000 – $40,000. Final price depends on configuration, voltage and shipping; contact Leabon for a confirmed quotation.
Frequently Asked Questions
- Q: What is an automatic edge banding machine used for?
- A: It seals the exposed edges of panels (MDF, plywood, particleboard, melamine) with PVC, ABS or veneer tape so the board core is protected from moisture and impact, and the furniture looks clean and finished.
- Q: PUR vs EVA hot-melt glue — which should I choose?
- A: EVA is economical and covers most cabinet and furniture work. PUR hot-melt glue gives a stronger, heat- and moisture-resistant bond — ideal for kitchen, bathroom, outdoor and high-humidity panels. This model is supplied with PUR as standard.
- Q: What panel and edge-band sizes can it handle?
- A: Typical range: Panel thickness: 9-60mm; Edge band thickness: 0.4-3mm; Feeding speed: 12-20m/min. See the full specification table on this page for the exact model figures.
- Q: How fast is the production line?
- A: Feeding speed is around 12-20m/min depending on panel profile and glue type, supporting continuous panel-by-panel output for factories.
- Q: Do you provide installation, training and warranty?
- A: Yes. Leabon provides overseas on-site installation, operator training and a 12-month warranty with spare-parts support, so your line runs reliably from day one.
