Features of PUR Hot Melt Adhesive Profile Wrapping Machine
1.The machine has the characteristics of simple operation, rapid lamination, strong adhesion, and no bubbles. 2.PUR glue has anti-aging and anti-ultraviolet properties, and is the first choice for outdoor products. 3.Excellent performance is mainly obtained for different angles, arcs, roughness and edges. 4.With a 5 gallon PUR hot melt glue system.Machine display
A brand new way
functions introduction
OUR CERTIFICATES
How a Profile Wrapping Machine Works
A profile wrapping machine runs a decorative foil — PVC, veneer, leather or paper — over the surface of a machined profile while the substrate travels past a gluing and pressing station. With PUR hot melt adhesive the bond cures in line, so the film follows the profile’s angles, arcs and edges without lifting and comes off the machine as a finished, low-emission surface.
PUR Hot Melt Adhesive Profile Wrapping Machine PUR hot melt adhesive profile wrapping machine is suitable for sticking leather,PVC,veneer etc on decorative strip(wpc strips),aluminum profiles,wood profiles and is mainly for differentangles,ARC,roughness and the edges to get excellent performance.what’s more,PUR glue has the features of anti-aging,anti-UV which makes it to be the top choice for outdoor.
Frequently Asked Questions
- Q: What is a profile wrapping machine used for?
- A: It laminates decorative film — PVC, veneer, leather or paper — onto profiles such as WPC strips, aluminium and wood mouldings, window and door profiles, and furniture trims.
- Q: What is PUR hot melt adhesive and why use it?
- A: PUR (polyurethane reactive) hot melt is applied molten, then reacts with moisture in the air to cross-link and cure. The result is a waterproof, heat-resistant bond with an almost invisible glue line — the standard choice for exterior and wet-area profiles, and free of solvent emissions.
- Q: What profiles can be wrapped?
- A: Angled, arced and rough-surfaced substrates are all suitable: the pressing rollers follow the contour, so curved and multi-angle profiles can be wrapped in a single pass.
- Q: What materials can be wrapped onto the profile?
- A: Decorative film such as PVC, veneer, paper, leather and aluminium-look foil. Foil thickness and profile geometry set the roller configuration — send us a sample cross-section and we will confirm feasibility.
- Q: What is the difference between profile wrapping and edge banding?
- A: Edge banding closes the raw edge of a flat panel with a narrow band; profile wrapping covers the whole visible surface of a shaped linear profile — window and door mouldings, WPC strips, aluminium sections — with a continuous decorative film.
- Q: What is the working speed and power supply?
- A: Speed and power supply are model-dependent and set for your market’s voltage. Contact Leabon with your profile size, foil type and target output and we will confirm the specification.
Browse more Profile Wrapping Machine range, or contact Leabon for a confirmed quotation.