Features of T-710 Bevel MDF Automatic Edge Banding Machine
1. Taiwan Delta frequency controller, insured the duration and precision of our wood edge banding machine. 2. Delta PLC, be one set of key part, air cylinder use Airtac from Taiwan, HIWIN liner track, Honeywell limitation switch, Taiwan CPG conveyor motor, all key parts we choose market tested best brands to try to guarantee our machine performance and let our customers enjoy to use our machines. 3. Independent lifting up and down system is optional, simple and convenient. 4. Diamond saw blade cut 45° edging. 5. Hot Air Blow make adhesive better stick. 6. Flat scrapping spray cleaning system. Functions: Incline Cutting / 45°&90° Gluing /45°&90° Tape press/ Rough Trimming/ End Cutting/ Fine Trimming/ Flat Scraping / Spraying/Buffing
PARTS PICTURES
45° Cutting
Incline gluing
Straight gluing
Incline pressing
Rough trimming
End cutting
Fine trimming
Scrapping
Processed products
OUR CERTIFICATES
How an Automatic Edge Banding Machine Works (8 Steps)
- Pre-milling — mills the panel edge flat for a seamless glue joint.
- Gluing — applies EVA hot-melt glue evenly along the panel edge.
- Edge feeding & pressing — feeds PVC/ABS/veneer tape and presses it onto the glued edge.
- End trimming — cuts the front and rear excess tape flush with the panel.
- Rough & fine trimming — trims top and bottom tape overflow to a smooth radius.
- Corner rounding — rounds the two ends of the edge for safety and appearance.
- Scraping — scrapes the trimmed edge to remove residual glue lines.
- Buffing — polishes the edge to a clean, glossy finish.
T-710 Bevel MDF Automatic Edge Banding Machine Both For 45 Degree And 90 Degree Glue Type: EVA
EVA hot-melt glue is the cost-effective standard for most furniture and cabinet production; PUR is available on request for high-humidity or heavy-duty use.
Key Parameters
- Panel thickness: 10-25mm 45°
- Edge band thickness: 0.4-3mm
- Feeding speed: 12m/min
- Working air pressure: 0.6Mpa
Price Range
Typical ex-works price for this class of machine: $8,000 – $20,000. Final price depends on configuration, voltage and shipping; contact Leabon for a confirmed quotation.
Frequently Asked Questions
- Q: What is an automatic edge banding machine used for?
- A: It seals the exposed edges of panels (MDF, plywood, particleboard, melamine) with PVC, ABS or veneer tape so the board core is protected from moisture and impact, and the furniture looks clean and finished.
- Q: PUR vs EVA hot-melt glue — which should I choose?
- A: EVA is economical and covers most cabinet and furniture work. EVA hot-melt glue is the cost-effective standard for most furniture and cabinet production; PUR is available on request for high-humidity or heavy-duty use. This model is supplied with EVA as standard.
- Q: What panel and edge-band sizes can it handle?
- A: Typical range: Panel thickness: 10-25mm 45°; Edge band thickness: 0.4-3mm; Feeding speed: 12m/min. See the full specification table on this page for the exact model figures.
- Q: How fast is the production line?
- A: Feeding speed is around 12m/min depending on panel profile and glue type, supporting continuous panel-by-panel output for factories.
- Q: Do you provide installation, training and warranty?
- A: Yes. Leabon provides overseas on-site installation, operator training and a 12-month warranty with spare-parts support, so your line runs reliably from day one.
