Product overview
The MB300 is the smallest machine in the Leabon glue spreader range. It is a tabletop unit of only 35 kg, built for samples, small parts and short runs where a bench-type or stand machine would take up more room than the job justifies. It bolts or clamps onto an existing workbench and plugs into a standard supply.
A Ø156 mm rubber roller applies glue across a 300 mm working width at 22 m/min – the fastest feed in the range, because the short path lets the roller run lightly. It is the practical choice for sample rooms, prototyping benches, model and craft work, and small furniture parts.
Product gallery

Key features
- Only 35 kg – the lightest machine in the range, easy to lift onto any workbench.
- 300 mm working width with a Ø156 mm rubber applicator roller.
- Fast 22 m/min feed from a single 0.4 kW motor.
- Bolts or clamps to an existing bench, so no floor space is lost.
- Stainless-steel glue tank and collecting tray – corrosion-free and easy to clean.
- Chrome-plated pressure roller for a flat, even coat on small parts.
- Roller guard and an emergency-stop button for safe operation.
- Simple mechanical controls with almost no set-up between jobs.
How it works
Glue is poured into the stainless-steel tank under the applicator roller. A small part placed on the feed plate is drawn between the rubber applicator roller and the chrome-plated pressure roller, which presses a film of adhesive onto the face. Coating weight is set by the gap between the applicator and doctor rollers.
The part leaves the roller ready for pressing, veneering or assembly. Because the machine runs at 22 m/min and needs no conveyor set-up, a batch of small parts can be glued in a few minutes at the bench.
Models and specifications
The MB300 tabletop is supplied as a single model, sized for bench work. The Specification tab below lists its full data.
- MB300 tabletop — 300 mm working width, Ø156 mm roller, 22 m/min, 0.4 kW motor, 35 kg.
Full data for every model is in the Specification tab above.
Scope of application
The tabletop spreader suits sample rooms, prototyping benches and small workshops: veneer and laminate samples, small cabinet parts, edge-glued pieces, model and craft work, and any job too small to justify a floor-standing spreader.
Options and customisation
- Chrome-plated or stainless-steel roller in place of rubber.
- Drive motor built to the voltage at your site.
- Spare applicator rollers and doctor blades supplied with the machine.
Packing and shipping
The 35 kg machine is wrapped and packed in a small plywood case for sea freight. Its size means several units ship in the space of one full-size spreader, and it can be combined with other machines in your container.
Frequently Asked Questions
What is a tabletop glue spreader used for?
It glues small parts and samples – veneer and laminate samples, small cabinet parts, edge-glued pieces and craft work. It suits sample rooms and workshops short of floor space.
Does it need a stand?
No. At 35 kg it bolts or clamps onto an existing workbench, which is why it is the most compact machine in the range.
How does it compare with the bench-type MB400?
It is lighter and narrower – 300 mm of working width against 400 mm – so it is aimed at smaller work. The MB400 bench-type takes larger panels.
Can it handle veneer and laminate?
Yes. It applies an even film for veneer, laminate and similar facing materials on small parts. Tell us the material and thickness and we will confirm the roller setting.
What power supply does it need?
A single 0.4 kW motor – the voltage is built to your site requirements, so let us know your supply when you enquire.





