Leabon Universal HF(RF)Wooden Frame Joining Machine(Solid Wood Cabinet Door) Main Features:
1. Smart dual-mode / more solid assembly 2. It only takes 6-20 seconds for each workpiece to be completed, 45°/90° dual-mode assembly, easy to learn and operate 3. The three-axis adjustment is imported ball screw, and the X/Y axis pressure sequence can be adjusted 4.45°/90° paint-free, solid wood wardrobe doors, cabinet doors, drawer panels, quick assembly gluing of furniture frames 5. The equipment adopts the function of fault self-checking, which can accurately alarm and find out the fault pointProcess Show
Workshop Practice
Our Certificates
How High-Frequency Wood Processing Works
A high-frequency (HF) wood machine uses radio-frequency energy to heat and cure glue evenly through the thickness of the joint, not just at the surface. This is used for frame clamping, curved laminating and finger-jointing, where fast, uniform curing prevents warping and speeds up production versus cold pressing.
Universal HF(RF)Wooden Frame Joining Machine(Solid Wood Cabinet Door) High-frequency precision framing machine is suitable for fast gluing and assembling of wood/bamboo frame products such as cabinet doors, wardrobe doors, photo frames, wooden doors, wooden boxes, drawers, furniture doors and windows. It can be spliced with or without wood tenon without nailing.
Frequently Asked Questions
- Q: What is a high-frequency wood machine used for?
- A: It cures glue in frames, curved laminations, chair parts and finger joints quickly and evenly, replacing slow cold pressing.
- Q: Why use high frequency instead of cold pressing?
- A: HF heats the glue line directly, so curing takes minutes not hours and the joint stays flat — far higher daily output.
- Q: What products benefit from HF curing?
- A: Cabinet doors, window frames, curved furniture parts, chair components and engineered wood assemblies.
- Q: Is high-frequency wood processing safe?
- A: The cabinet is shielded and interlocked; operators follow standard procedures and the HF field is contained during the cycle.
- Q: What glue works with HF machines?
- A: Standard PVAc (white/yellow wood glue) and urea-formaldehyde cure well under HF; confirm the adhesive with Leabon for your product.
- Q: What is the typical cycle time?
- A: Many frame and lamination cycles finish in 1–5 minutes depending on section size and moisture.
Browse more High Frequency Wood Processing Machine range, or contact Leabon for a confirmed quotation.
