Branded Electrical Parts
The electrical parts use Schneider Brand or SIEMENS Brand.
Side View
Main spindle of the equipment use Japan NSK and Sino-Japan manufactured TR bearing.
Heavy Duty 2 Rollers Structure
Sanding paper swing controlled by Omran photoelectric.
Drum Sander Conveyor
Conveyor use marble material, its shape won’t be changed because of temperature. Precision and grinding duration is higher than steel conveyor.
Woodworking Drum Sander machine SR-RP1000
- Work piece thickness displayed by micro-computer button type thickness dis-player, precise and durable.
- Sanding paper swing controlled by air power, swing is smooth and even.
- Front and back double emergency knob, can control the machine to urgently stop within 3-5 Seconds.
- Faults Display fitted (sanding paper right and left deviation, inadequate air pressure, emergency knob, and over thickness work piece). It’s easy to judge basic equipment trouble. Faults emergency stop adopts automatically descend protection facility, thus the panel surface won’t be damaged from emergency stop.
- Use branded conveyor, grinding duration is 3-5 times as ordinary conveyor.
- Conveyor fit with automatic centering facility.
- Conveyor speed adjusted by frequency controller, easy adjusting. It can be adjusted as per the work piece in processing to improve sanding quality.
- Sanding paper swing controlled by Omran photoelectric.
- 1st group sanding roller use 240mm diameter eccentric steel thickness roller, high smoothness, heavy sanding quantity; 2nd group roller use 210mm diameter, 70 shore hardness thickness roller and fit with ex-tractable polishing pad.
- Conveyor use T shape screw pole craft, high precision.
- Main motor automatically star triangle(Less pressure) start.
- Main spindle of the equipment use Japan NSK and Sino-Japan manufactured TR bearing.
- The electrical parts use Schneider Brand .
- Conveyor use marble material, its shape won’t be changed because of temperature. Precision and grinding duration is higher than steel conveyor.
How a Wide Belt Sander Works
A wide belt sander pulls a panel through a looped abrasive belt held by a rotating drum or platen, levelling the surface and removing plane marks in a single pass. Adjustable feed speed and belt grit control the finish, readying panels for veneer, laminate or lacquer.
It’s a drum sander machine with 2 drums, thus it’s ideal for sanding and polishing high surface requirement wood. As well It’s also good for hard solid wood, fine wood, plywood etc.material panels, doors, furniture big thickness sanding and polishing sanding work.
Frequently Asked Questions
- Q: What is a wide belt sander used for?
- A: It flattens and smooths wood, MDF and plywood panels before veneer, laminate or painting.
- Q: What grit should I use?
- A: Start coarse (80–120) to level, then finer (180–320) for a finish-ready surface; the sequence depends on material.
- Q: How wide a panel can it sand?
- A: Working widths run from ~600 mm to 1000 mm and wider industrial units; match to your panel size.
- Q: Can it calibrate thickness?
- A: Yes — many wide belt sanders double as thickness calibrators with a fixed bed and measured removal.
- Q: Does it need dust extraction?
- A: Yes — connect it to a dust collector (Leabon supplies auxiliary collectors) for a clean, safe shop.
- Q: Is training included?
- A: Yes — installation guidance, operation training and spare-part support are provided.
Browse more Wide Belt Sanding Machine range, or contact Leabon for a confirmed quotation.
